Hood Design Optimization for Effective Dust Control | powderbulksolids.com

2022-03-24 11:22:04 By : Ms. lisa chen

Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

See All Safety & Compliance »

Powder & Bulk Solids Staff | Dec 16, 2021

On Tuesday, January 25, 2022 at 2 p.m. Eastern/11 a.m. Pacific, Diane Cave P.Eng, regional manager of Eastern Canada, Element6 Solutions, will present "Hood Design Optimization for Effective Dust Control" as part of Powder & Bulk Solids' DryPro webinar series.

In many dust collection applications there is often little thought given to the final collection point: the hood. Hoods can be the most important part of the system; if the hood is located poorly or designed inadequately, then the system will not collect the dust effectively. 

The objective of this webinar is to provide an overview of the following:

Cave has spent the past 16 years working with the design, installation, and retrofitting of dust collection systems in industries ranging from sawmills and grain installations to food and beverage and specialty chemicals. Her expertise covers all aspects of dust collection systems from troubleshooting system issues to upgrading systems to meet current codes and standards. Cave has also assessed hundreds of dust collection systems for combustible dust hazards using the latest NFPA codes and standards. She can also provide advice and design experience for explosion protection systems, vessel retrofits, Pred verification, and static bonding and grounding. Cave has a degree in Chemical Engineering from Dalhousie University in Halifax, Nova Scotia.

More information about text formats

Check out Powder & Bulk Solids Industry Master directory.