Low noise, large customized filter area motor-powered central dust collector

Working principleCleaning: when dusts accumulate continuously on filter cartridge\'s layer surface, the pressure difference between it\'s interior and exterior will increase steadily, when the pressure difference reach pre-set value(1000-1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow

Featured Products

Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine
Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine


Working principle

Cleaning: when dusts accumulate continuously on filter cartridge's layer surface, the pressure difference between it's interior and exterior will increase steadily, when the pressure difference reach pre-set value(1000-1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge's layer surface, dusts fall into dust collector under gravity, thus the whole cartridge's layer surface is cleaned.




Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine

Product introduction
Incorporated world leading environmental technology, double working bay double filter cartridge fume purifier is a technically advanced industrial dust & fume purifier, it's developed with full consideration of the forming, characteristics and harm of fume and based on actual conditions of cutting and welding workshop.

This purifier can be automatically cleaned and manually cleaned, automatically cleaning is as following:
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation pulse blow cleaning.
2. When the fan stops working, the system will implement interval rotation pulse blow cleaning for three times.

Main feature

1. Suction arm can be rotated 360° horizontally, according to actual working condition, suction volume can be adjusted by adjusting volume valve in suction hood.
2. PTFE coating(highly effective glass fiber)micro particle filtration, filtration efficiency reaches 99.99%, meanwhile maintain a high air flow

3. purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials


Technical parameters
Noitemparameter
1fan typeKSDC-8609B
2treatment of air flow6500m3/h
3motor power7.5kw
4power supply380V/50Hz or 460V/60Hz
5filtration area135m²
6number of filter cartridges9pieces
7filter mediumPTFE coating filter material/(highly effective glass fiber)
8filtration efficiency>99.9%
10compressed air0.5~0.6 MPa
11noise75±5dB(A)
12weight1420±20KGS
13dimensions(excluding suction arm)1800×2000×2500mm


Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine
Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine

    
Company profile
 
Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine
 
Exhibition


Low Noise Level and Big Filteriing Area Customized Motor Power Central Dust Collector Machine

Package & Shipping

Package: Package Used Wooden Box without Fumigation

The package would include spare parts box and machine installation tools.

Transportation By Sea or By Air are both Acceptable.

 

For more information, please contact:

Eric Lau

 
 
 
 
Add: Block 1, No. 98, Shiyuan Rd., Songjiang Dist., Shanghai, China 201600

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours