Industrial air purification systems, dust collectors for cutting and welding

CertificationWorking principleDust laden fume are sucked into the extractor by the suction force induced by fan\'s working, with deflector fume\'s flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the fil

Featured Products

Industrial Air Purification System, Dust Collector for Cutting, Welding


Certification

Industrial Air Purification System, Dust Collector for Cutting, Welding

Working principle

Dust laden fume are sucked into the extractor by the suction force induced by fan's working, with deflector fume's flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filter cartridge. The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge's interior and then discharged into workshop directly or out of the workshop through pipe line.

Industrial Air Purification System, Dust Collector for Cutting, Welding

Product introduction

Incorporated world leading environmental technology, double working bay double filter cartridge fume purifier is a technically advanced industrial dust & fume purifier, it's developed with full consideration of the forming, characteristics and harm of fume and based on actual conditions of cutting and welding workshop.

This purifier can be automatically cleaned and manually cleaned, automatically cleaning is as following:
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation pulse blow cleaning.
2. When the fan stops working, the system will implement interval rotation pulse blow cleaning for three times.

 

Main feature

1. Suction arm can be rotated 360° horizontally, according to actual working condition, suction volume can be adjusted by adjusting volume valve in suction hood.

2.PTFE coating micro particle filtration, filtration efficiency reaches 99.99%,  high air flow

3. Depending on needs, 2m, 3m flexible suction arm are available.

4.for purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials

5. the extractor can clean dust automatically.
 

Technical parameters

NO.ItemParameter
1fan typecentrifugal fan
2treatment of air flow6500±300m3/h
3motor power7.5 kw
4power supply380V/50Hz
5filtration area90m&sup2
6number of filter cartridges6 pieces
7filter mediumimported filter material
8filtration efficiency>99.9%
9number of pulse blowing valves6 pieces
10compressed air0.5~0.6 Mpa
11volume of compressed air25L
12noise72±5dB(A)
13weight1050±20kg
14dimensions(excluding suction opening)1750×1620×2150mm


Application

Industrial Air Purification System, Dust Collector for Cutting, Welding
Industrial Air Purification System, Dust Collector for Cutting, Welding
Industrial Air Purification System, Dust Collector for Cutting, Welding

Company Profile

Industrial Air Purification System, Dust Collector for Cutting, Welding



Exhibition
Industrial Air Purification System, Dust Collector for Cutting, Welding

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours