water washing tower for voc gas dealing
Theory and structure:
It has base, filling layer, fog layer, recycle watering circuit, recycle water groove , water pump and so on.
Application range:
Loobo exhaust gas washing tower is widely used to treat the tail gas like hydrogen fluoride, SO2, hydrogen chloride, chlorine, hydrogen sulfide, nitric oxide, and all kinds of acid mist produced by chemical engineering,medicine, petrol industries and lavation, spraying, washing, absorption, neutralization, foam, drying, desorption,demist, purification tower. Its design is advanced, reasonable, novelty, can make the air and liquid separate sufficiently, absorbs thoroughly, has a larger purification area based on same cross area. According to the stipulation of < emission standard of air pollutants>, we will apply wash, brasque, whirl, organic absorption, absorption/ purification and more advanced power wave absorption/purification system based on different
medium. The purification efficiency can be up to 80%-99.8% based on different requirement.
Exhaust gas washing process introduction:
It can use the contact between gas and liquid to transmit the pollutants in the gas into liquid, then separate the clean air from polluted liquid to achieve to air purification.
After particle pollutants in air flow gets in touch with scrubbing solution, liquid drops or liquid film is attached to/ wetting the particles and have the particles separated by gravity/inertia. The air pollutants will be sent to scrubbing solution by turbulence, molecule diffusion and chemical reaction. We can add chemical substances, control air stink substances by absorption way.
Parameters:
UV Photolysis Oxidation Deodorizing Equipment
With a special high energy high ozone UV ultraviolet light beam irradiation flue gas cracking industrial gases such as benzene, toluene, xylene, trimethylamine, hydrogen sulfide and methyl mercaptan, sulfide, butyl acetate, ethyl acetate, dimethyl disulfide, the molecular structure of styrene, organic or inorganic polymer odorous compounds under high energy beam exposure to the sun's ultraviolet rays, degraded into low molecular compounds, such as CO2, H2O, etc.
High energy and high ozone UV light beam is used to decompose oxygen molecules in the air to produce free oxygen, namely active oxygen, which needs to be combined with oxygen molecules due to the imbalance of positive and negative electrons carried by free oxygen.UV+O2 O-+O * (reactive oxygen)O+O2 O3(ozone), it is known that ozone has a strong oxidation effect on organic matter, the industrial waste gas and other irritating odor has an immediate effect on the removal.
After the industrial waste gas is input into the purification equipment by exhaust equipment, the purification equipment USES high-energy UV ray beam and ozone to carry out synergistic decomposition and oxidation reaction on the industrial waste gas, so that the industrial waste gas is degraded into low molecular compounds, water and carbon dioxide, and then discharged from the outdoor through exhaust pipe.
High energy UV beam is used to crack the molecular bonds of bacteria in industrial waste gas, destroy the nucleic acid (DNA) of bacteria, and then carry out oxidation reaction through ozone to achieve the purpose of purification and killing bacteria completely.The purifying device consists of a primary filter unit, ultraviolet lamp, ballast, catalytic plate (TiO2) and other components.
Our company:
Qingdao Loobo Environmental Protection Technology Co., ltd, is a leading manufacturer of industrial fume and dust exhaust systems in China and is one high-tech enterprise integrating with scientific, R&D, manufacturing,maintenance and sales .
We have been dedicated to providing clean and safe working environments for welders and metal fabrications etc. for over 12years. All of our welding fume extractors and filtering systems are ISO &CE compliant to provide the best protection. The Qualitycan be guaranteed.
We have done lots of projects and turnkey plans in the domestic markets in the dust collection projects for the industrial, especially for the welding workshops.
We can provide solutions for most demanding challenges. Whether you have large production line operations or a unique manufacturing process, we can develop a welding smoke extraction system to meet your needs.
Loobo staff insist on the principle of "enterprising, realistic, preciseness, unity", go ahead with innovation and pioneering spirit, regard the reliable technology as the core, regard the reliable quality as the life, regard the customer as God, dedicatedto supply the most cost-effective environmental protection products, high quality project contract effecting, and attentive after-service.
The main products includes portable welding fume extractor, downdraft bench, flexible suction arm, central dust purification system, bag and cartridge filter dust collector, oil mist purifier, painting purifying system, welding protection series, project for industry exhaust gas and pollution handling, etc.
Certainly, Loobo are now also aiming to solve the waste gas treatment in recent years and have successful cases done in this gas treatment field.And get more and more advanced technology and physical experiences
Our cetifications:
Packaging and shipping
FAQ:
Theory and structure:
It has base, filling layer, fog layer, recycle watering circuit, recycle water groove , water pump and so on.
Application range:
Loobo exhaust gas washing tower is widely used to treat the tail gas like hydrogen fluoride, SO2, hydrogen chloride, chlorine, hydrogen sulfide, nitric oxide, and all kinds of acid mist produced by chemical engineering,medicine, petrol industries and lavation, spraying, washing, absorption, neutralization, foam, drying, desorption,demist, purification tower. Its design is advanced, reasonable, novelty, can make the air and liquid separate sufficiently, absorbs thoroughly, has a larger purification area based on same cross area. According to the stipulation of < emission standard of air pollutants>, we will apply wash, brasque, whirl, organic absorption, absorption/ purification and more advanced power wave absorption/purification system based on different
medium. The purification efficiency can be up to 80%-99.8% based on different requirement.
Exhaust gas washing process introduction:
It can use the contact between gas and liquid to transmit the pollutants in the gas into liquid, then separate the clean air from polluted liquid to achieve to air purification.
After particle pollutants in air flow gets in touch with scrubbing solution, liquid drops or liquid film is attached to/ wetting the particles and have the particles separated by gravity/inertia. The air pollutants will be sent to scrubbing solution by turbulence, molecule diffusion and chemical reaction. We can add chemical substances, control air stink substances by absorption way.
Parameters:
| Type | Airflow | Size | Water Pump Power | Padding |
| LBFT-1-500 | 1200m³/h | dia600*3500mm | 0.75x2kw | 0.5m³ |
| LBFT-1-1000 | 5000m³/h | dia1000*4500mm | 4x2 | 1.32m³ |
| LBFT-1-1600 | 10000m³/h | dia1600*5000mm | 5.5x2 | 2.65m³ |
UV Photolysis Oxidation Deodorizing Equipment
With a special high energy high ozone UV ultraviolet light beam irradiation flue gas cracking industrial gases such as benzene, toluene, xylene, trimethylamine, hydrogen sulfide and methyl mercaptan, sulfide, butyl acetate, ethyl acetate, dimethyl disulfide, the molecular structure of styrene, organic or inorganic polymer odorous compounds under high energy beam exposure to the sun's ultraviolet rays, degraded into low molecular compounds, such as CO2, H2O, etc.
High energy and high ozone UV light beam is used to decompose oxygen molecules in the air to produce free oxygen, namely active oxygen, which needs to be combined with oxygen molecules due to the imbalance of positive and negative electrons carried by free oxygen.UV+O2 O-+O * (reactive oxygen)O+O2 O3(ozone), it is known that ozone has a strong oxidation effect on organic matter, the industrial waste gas and other irritating odor has an immediate effect on the removal.
After the industrial waste gas is input into the purification equipment by exhaust equipment, the purification equipment USES high-energy UV ray beam and ozone to carry out synergistic decomposition and oxidation reaction on the industrial waste gas, so that the industrial waste gas is degraded into low molecular compounds, water and carbon dioxide, and then discharged from the outdoor through exhaust pipe.
High energy UV beam is used to crack the molecular bonds of bacteria in industrial waste gas, destroy the nucleic acid (DNA) of bacteria, and then carry out oxidation reaction through ozone to achieve the purpose of purification and killing bacteria completely.The purifying device consists of a primary filter unit, ultraviolet lamp, ballast, catalytic plate (TiO2) and other components.
Our company:
Qingdao Loobo Environmental Protection Technology Co., ltd, is a leading manufacturer of industrial fume and dust exhaust systems in China and is one high-tech enterprise integrating with scientific, R&D, manufacturing,maintenance and sales .
We have been dedicated to providing clean and safe working environments for welders and metal fabrications etc. for over 12years. All of our welding fume extractors and filtering systems are ISO &CE compliant to provide the best protection. The Qualitycan be guaranteed.
We have done lots of projects and turnkey plans in the domestic markets in the dust collection projects for the industrial, especially for the welding workshops.
We can provide solutions for most demanding challenges. Whether you have large production line operations or a unique manufacturing process, we can develop a welding smoke extraction system to meet your needs.
Loobo staff insist on the principle of "enterprising, realistic, preciseness, unity", go ahead with innovation and pioneering spirit, regard the reliable technology as the core, regard the reliable quality as the life, regard the customer as God, dedicatedto supply the most cost-effective environmental protection products, high quality project contract effecting, and attentive after-service.
The main products includes portable welding fume extractor, downdraft bench, flexible suction arm, central dust purification system, bag and cartridge filter dust collector, oil mist purifier, painting purifying system, welding protection series, project for industry exhaust gas and pollution handling, etc.
Certainly, Loobo are now also aiming to solve the waste gas treatment in recent years and have successful cases done in this gas treatment field.And get more and more advanced technology and physical experiences
Our cetifications:
Packaging and shipping
FAQ:
Q : Do you have after-sale service?
A : yes, we have perfect after-sale service for the products' all life.
Q : Where is your factory?
A: We are in Qingdao city,Shandong province,China.
Q: Are you a manufacturer or a trading company
A: We are manufacturer.
Q:Do you give any discount ?
A:I'll surely try my best to help you get those by the best price and good service at the same time.
Q:How long is the warranty?
A:The warranty is one year (except wearing spare parts )
Q:Whether your company can supply installation?
A:Yes,no problem.
More questions please contact Rice ,my phone No. is 008615953214653.